DN 100PN 63
Check valve
Indicative price
18,500,000 UZSper unit, excl. VAT
This is not an offer. The final price and terms are set out in the commercial proposal. TermsSchematic of the equipment type, not a photo of this item.
Available
Check valve DN 150 / PN 40
- Status
- Available
- Quantity
- 5 pcs
- Warehouse
- Tashkent, Uzbekistan
- Condition
- to be confirmed
- Inventory number
- IN0014
- Manufacturer
- to be confirmed
Indicative price
20,500,000 UZS
per unit, excl. VAT. Payment by bank transfer only.
All 5 pcs: 102,500,000 UZS
This is not an offer. The final price and terms are set out in the commercial proposal.
Terms Concerning Price Information and Requests
The price shown is provided for information purposes only, is preliminary and does not constitute an offer or a public offer.
The final price, availability, scope of supply, technical condition, terms of payment and delivery, and other commercial terms are confirmed by GALARIS LLC on an individual basis as of the date of the commercial proposal and/or the conclusion of the contract.
The posting on the website of information about a product and its indicative price does not create an obligation for GALARIS LLC to sell the product at the price shown.
Submitting a request through the website constitutes the buyer’s request to receive information or a commercial proposal and does not in itself constitute the conclusion of a contract, confirmation of an order, or acceptance of any terms by GALARIS LLC.
A contract shall be deemed concluded only after the parties have agreed on its terms and the relevant contract or other document has been executed by the authorised representatives of the parties.
Source: https://galaris.uz/en/equipment/in0014-check-valve-dn150-pn40. Data as of 08.10.2026. Prices exclude VAT; payment by bank transfer only.
Specifications
Confirmed for this item
According to GALARIS inventory records.
| Inventory number | IN0014 |
|---|---|
| Category | Pipeline valves |
| Type | Check valve |
| Nominal size (DN), mm | 150 |
| Nominal pressure (PN), kgf/cm² | 40 |
| Quantity | 5 pcs |
| Inventory record | «Обратный клапан», «Ду-150\Ру-40» |
Series/model characteristics per reference data
These describe the type or series, not the specific unit in stock.
| Check valves (definition) | Valves intended for automatic prevention of reverse flow of the working medium[1] |
|---|---|
| Designs | Check valve (lift type) or swing check valve (swing type) — different designs[1] |
| Nominal pressure PN (definition) | The highest gauge pressure at 20 °C at which long-term operation of the valve is permissible[2] |
| PN 40 per GOST 356-80 | 4.0 MPa (40 kgf/cm²)[2] |
To be confirmed from the nameplate/data sheet
- Manufacturer and model
- Design: lift check valve or swing check valve
- Body material
- Connection (flanged or butt-weld)
- Working medium, temperature and working pressure
- Installation position
- PN unit from the nameplate
Check valves of this DN/PN are produced in lift and swing versions, with different materials and connections. The specific version and characteristics are to be confirmed from the nameplate/data sheet.
Designations: Ду 150 Ру 40, DN150 PN40
Typical application of this type of equipment
Check valves are typically used for automatic prevention of reverse flow of the working medium. Typical application: pump discharge lines, where they protect the pump and equipment against reverse flow.[1][3]
The actual suitability of a specific item for the conditions of the buyer’s project must be confirmed taking into account the technical documentation, the equipment version, the working medium and the project requirements.
Reference data sources
- GOST 24856-2014 “Pipeline valves. Terms and definitions”
- GOST 356-80 “Pipeline valves and fittings. Nominal, test and working pressures. Series”
- Socla (supplied by Danfoss), data sheet for 402/412/422 check valves
Identification and condition
| Manufacturer | to be confirmed |
|---|---|
| Year of manufacture | to be confirmed |
| Condition | to be confirmed |
| Serial number | to be confirmed |
| Standards | to be confirmed |
Data is filled in from the data sheet and nameplate. Photos of the nameplate and actual condition are available on request.
Photos
Photos of this item are being prepared. You can request them.
Front view
Side view
Nameplate
Key components
Actual condition
Terms
| Price | Indicative price: 20,500,000 UZS · per unit, excl. VAT |
|---|---|
| VAT | Prices exclude VAT |
| Payment | Bank transfer only |
| Warehouse | Tashkent, Uzbekistan. Inspection by prior arrangement. |
| Delivery | Delivery terms on request |
Related services
Equipment Inspection
Verification of availability, condition, completeness, markings and available documentation.
Manufacture of Spare Parts
Arranging the manufacture of spare parts and components based on the technical documentation or sample provided.
Sourcing, Procurement and Import of Spare Parts
Selection of components from manufacturers and suppliers and arrangement of their delivery.
Equipment Installation
Arranging the installation of supplied equipment at the customer’s site.